Knowledge & Skills- Full knowledge of T.O. 33B-1-1 Non Destructive Inspection Methods and Basic Theory.- Able to certify I/A/W NAS-410 as a level II technician Liquid Penetrant, Magnetic Particle, Ultrasound, Eddy Current and Radiography.- Knowledge of The Army Maintenance Management System (TAMMS), Aviation unit level and Intermediate level maintenance processes and procedures.- Extensive knowledge of component time before overhaul, records keeping, historical records, and associated equipment, and applicable technical orders required.- Working knowledge of Federal Aviation Administration maintenance management programs, historical records, and system of component tracking and air worthiness directive tracking.- Exceptional ability to comprehend all aspects of TAMMS, Quality Control, Quality Assurance, and generally accepted maintenance practices. - Working knowledge of Quality Control, Quality Assurance and related programs and regulations.- Exceptional knowledge of and application of AWIS data management systems.- Effective interpersonal skills for complex system inspection relating to safety of flight and on the job maintenance activities.- Ability to analyze inspection findings, and determine best case analysis.- Fully knowledgeable of all requirements within the complex aviation maintenance repair, overhaul and functional use as they apply.- Able to interpret technical data, and determine best case path forward to correct deficiencies.- Possess a current U.S. passport or the ability to obtain one before the assignment. **Experience & Education**- High school diploma or equivalent is required. - FAA A&P and/or FCC Elements 1 and 3 required.- Five (5) or more years’ of recent experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced (US Army Helicopters) and their associated components. - Must possess a level of experience necessary to inspect all aircraft assigned to USAREUR. - Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned. - Must provide Classroom Training Certification for a minimum of 40 hours, IAW NAS 410, 6.1 Training. - Must provide NDI Certification and have a minimum of 600 experience time in hours, IAW NAS 410, 6.3.2 Equivalent Experience.- Previous experience with the Contract Field Team Maintenance concept and its application to U.S. Military maintenance, modification and repair of tactical aircraft systems preferred. - National Security Position (National Agency Check with written Inquires (NACI) or Single Scope Background Investigation (SSBI) qualification required.Physical Requirements/Working Environment- Must not have physical restrictions or existing medical conditions that may prevent them from serving in a remote area with limited medical care.- Must be able to lift and carry 50+ pounds. - Must be able to run, walk and stand on level and/or inclined surfaces for up to 8 hours minimum per day and sit for up to three hours per day. - Must have no physical limitations that may prevent wearing of flight helmet, body armor or other equipment required for this position. - Must be able to crouch, crawl, climb stairs, ramps, ladders, and work stands. - Must be able to walk or stand on level and/or inclined surfaces up to three (3) hours per day and sit for up to five (5) hours per day.- Must be able to routinely climb / descend stairs.- Must be able to routinely grasp or handle objects, use finger dexterity, bend elbows / knees, and reach above / below shoulders.- Must be able to read and interpret newspaper and typewritten print.- Must be able to communicate by voice and detect sound by ear.- Must be able to distinguish color and judge three-dimensional depths.- This classification activity, while principally accomplished in an office environment, does have duties that require frequent travel and require the individual to work outside the office environment. - Typical physical demands or activities include climbing, standing, bending, stooping, pushing, kneeling, reaching and walking. - May be required to lift objects whose weight normally will not exceed 50 pounds. - Special vision abilities required to perform this job are close vision, peripheral vision, color vision, depth perception and the ability to adjust and focus.