2
Photo Info

NASA continues safety research with second crash test

NASA Press Release | September 25, 2014

Estimated reading time 4 minutes, 57 seconds.

NASA researchers are geared up to crash test a 45-foot-long (13.7-meter) helicopter fuselage from a 30-foot (9.1-meter) height for the second time in a year — all in the name of safety. NASA is collaborating with other U.S. and international government agencies on the Transport Rotorcraft Airframe Crash test bed full-scale crash test scheduled for Oct. 1, weather permitting, at NASA Langley Research Center’s Landing and Impact Research Facility.

“The big difference in this year’s experiment is that we are testing three energy absorbing composite subfloor concepts that should help some of the dummy occupants sustain fewer injuries than they did in the first test,” said lead test engineer Martin Annett. “We have also made other improvements based on things we learned after that drop last August.”

The team has instrumented a former Marine helicopter airframe with crash test dummies, cameras and accelerometers. Almost 40 cameras inside and outside the helicopter will record how 13 data-recording crash test dummies and two non-instrumented manikins react before, during and after impact. “The ability to synchronize video with the data is really beneficial,” said Annett. “It made a huge difference in understanding how the motion of the occupants corresponded to the loads and acceleration seen in the data.”

Some of those cameras will focus on one side of the helicopter where technicians have painted black polka dots over a white background  — a photographic technique called full field photogrammetry.

“High-speed cameras filming at 500 images per second track each dot, so after the drop we can plot and see exactly how the fuselage buckled, cracked or collapsed under crash loads,” said test engineer Justin Littell.

“During this test we particularly want to see how well the composite subfloors absorb the energy of impact,” added Littell. “We’ll do that by comparing how the fuselage reacts versus last year’s test.”

During the drop, onboard computers will record more than 350 channels of data as the helicopter is swung by cables, like a pendulum, into a bed of soil. Just before impact, pyrotechnic devices release the suspension cables from the helicopter to allow free flight. The helicopter will hit the ground at about 30 miles an hour. The impact condition represents a severe but survivable condition under both civilian and military requirements.

Just as in last year’s test, the helicopter fuselage will drop from about 30 feet (9.1 m) at a speed of about 30 miles an hour at NASA Langley’s Landing and Impact Research Facility.

“The crash won’t look all that visually exciting,” said Annett. “Unlike in the movies there’s no huge fireball or spectacular special effects, but the occupants certainly get a jolt. According to the data some of the dummies would have sustained serious if not fatal injuries in last year’s crash test.”

Both tests are part of the Rotary Wing Project in the Fundamental Aeronautics Program of NASA’s Aeronautics Research Mission Directorate. “We are looking for ways to make helicopters safer,” said Rotary Wing Project Manager Susan Gorton. “The ultimate goal of NASA rotary wing research is to help make helicopters and other vertical take off and landing vehicles more serviceable — able to carry more passengers and cargo — quicker, quieter, safer and greener. Improved designs might allow helicopters to be used more extensively in the airspace system.”

For this test NASA supplied six crash test dummies, built two composite subfloor concepts and installed four emergency locator transmitters that researchers are evaluating. The U.S. Navy provided the CH-46 Sea Knight helicopter fuselage, seats, crash test dummies and other experiments. The U.S. Army Aeromedical Research Lab (USAARL) contributed a litter experiment and the Army CH-47 program office (PEO CARGO) provided a crash resistant troop seat.

The Federal Aviation Administration provided a side-facing specialized crash test dummy and part of the data acquisition system. Cobham Mission Systems contributed an active restraint system for the cockpit. The German Aerospace Research Center (DLR) and the Australian Cooperative Research Center for Advanced Composite Structures supplied a third composite subfloor technology. Other industry participants have also contributed experiments.

NASA will use the results of the tests to improve rotorcraft performance and efficiency. Researchers also want to increase industry knowledge and create more complete computer models that can be used to design safer helicopters.

Leave a comment

Your email address will not be published. Required fields are marked *

HAI Heli-Expo 2024 Recap

Notice a spelling mistake or typo?

Click on the button below to send an email to our team and we will get to it as soon as possible.

Report an error or typo

Have a story idea you would like to suggest?

Click on the button below to send an email to our team and we will get to it as soon as possible.

Suggest a story