The advanced lightweight V8 piston engine in Airbus Helicopters’ demonstrator aircraft uses widely available kerosene fuel. Airbus Helicopters Photo
Airbus Helicopters has successfully completed the first flight test of the high-compression engine demonstrator aircraft at around 3 p.m. on Friday, Nov. 6, at Marignane Airport.
The development and flight test of this new technology demonstrator is part of the European Clean Sky initiative’s Green Rotorcraft Integrated Technology Demonstrator (ITD) program, with support for these flight tests provided by the consortium of TEOS Powertrain Engineering and Austro Engine GmbH.
“The first result of the 30 minutes flight confirms the advantages of new-technology high-compression piston engines for rotorcraft in offering reduced emissions; up to 50 percent lower fuel consumption depending on duty cycle; nearly doubled range; and enhanced operations in hot and high conditions,” said Tomasz Krysinski, head of research and innovation at Airbus Helicopters.
In addition to confirming improvements in eco-efficiency, Airbus Helicopters’ in-flight evaluations in the upcoming months will also focus on the right power-to-weight ratios that would make high-compression engines sustainable alternatives to the turbine powerplants typically used in the helicopter industry. The flight test campaign will enable to establish the engine installation at Technology Readiness Level 6 (TRL 6).
Integrated into an H120, the 4.6-liter high-compression piston engine incorporates numerous technologies already applied on advanced self-ignition engines, and runs on the widely-available kerosene fuel used in aviation engines.
Its V8 design has the two sets of cylinders oriented at a 90 degree angle to each other, with a high-pressure (1,800 bar) common-rail direct injection and one turbocharger per cylinder bank.
Other features include fully-machined aluminum blocks and titanium connecting rods, pistons and liners made of steel, liquid-cooling and a dry sump management method for the lubricating motor oil as used on aerobatic aircraft and race cars.
The Green Rotorcraft ITD program that supported Airbus Helicopters’ research project is part of the Clean Sky Joint Technology Initiative, which is Europe’s most ambitious aeronautical research program ever.
Clean Sky’s goal is to develop breakthrough technologies that significantly increase environmental performance of the air transport sector, resulting in quieter and more fuel efficient aircraft and rotorcraft.
Environmental targets of Clean Sky are to reduce specific fuel consumption by 30 percent, carbon dioxide emissions by 40 percent and NOx by 53 percent.
Airbus Helicopters’ high-compression piston engine activity began in 2011, followed by company bench tests and system simulations, including Iron Bird successful tests in February 2014. Ground runs with the H120-equipped helicopter were performed during February and March of this year, leading to the first flight.
